User guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-2
Appendix B: Port and Cable Pin Assignments
Writer:
Chris Seiter
Project:
Appendix B: Port and Cable Pin Assignments
Comments:
File Name:
1009B_B.DOC
Last Saved On:
6/26/97 2:21 PM
BNC Port
The BNC Port provides a way to interface with 10 Mb/s coaxial cable (Thin
Ethernet) via an internal transceiver. Thin Ethernet is typically used as a bus
type network backbone. If you install Thin Ethernet cable, remember to close
off both ends with a 50-ohm terminator. A T-type connector and 50-ohm
terminator are provided with the 1009B hub.