User`s guide

3-20 TL891 MiniLibrary System User's Guide
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: d-ch3 Installation Last Saved On: 3/2/99 2:30 PM
1
9
6
3
4
2
5
4
10
5
7
7
8
6
SHR-1242
Figure 3-11. Rack Slide Parts for Standard 19” EIA/RETMA Rackmounting
1 Outer slide 6 Front
2 Intermediate slide 7 10-32 Screws
3
Inner slide (attached to
module)
8 10-32 Low Profile Screws
4 Lock Tab 9 Mounting Bracket
5 Rear 10 Nut Plate
WARNING: Step 5 should be performed by two people.
Make certain that when the module is fully extended that a force of 20% of the
rack weight, but not more than 57 lb. Applied in any direction but upwards does
not cause the rack to overbalance.
5. In front of the rack, lift the module to its installed height. Engage the
inner slides mounted on the module with the intermediate slides
protruding from the rack, and slide the module toward the rack until the
inner slide lock engages the intermediate slide. This leaves the entire
module protruding from the rack, locked in position, supported by
slides.
6. Press inward (toward the module) on each of the inner slide locks to
permit the intermediate slides to move toward the rack.