User`s guide

Installation 3-5
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: d-ch3 Installation Last Saved On: 3/2/99 2:30 PM
NOTE: The slide extensions, (6) in Figure 3-1, are not enclosed with the Pass-Through
mechanism parts. They are supplied as part of the installation hardware for the slides that
come with each of the modules.
Follow the instructions in the section entitled Mechanical Installation of the
Expansion and Base Modules. After the rack slides and the base modules are
in place, and after the Pass-Through mechanism is assembled, you will install
the Pass-Through mechanism in the rack by attaching the support braces (5) to
the slide extensions (6) using the angle brackets (7) and L-shaped nut plates
(8).
The internal parts you will need to recognize during assembly are shown in
Figure 3-2, Pass-Through Mechanism Car (Front View) and Figure 3-3, Car
Rear View Showing Belt Block.