User`s guide

Compaq Confidential – Need to Know Required

Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:

Part Number: ER-TL891-UA.A01 File Name: d-ch3 Installation Last Saved On: 3/2/99 2:30 PM

Chapter

Installation

This chapter describes the complete MiniLibrary System installation process

from planning and parts identification to mechanical installation, cabling, and

configuration.

Introduction

There are three major steps to the installation of a MiniLibrary System:

mechanical installation, cabling, and configuration.

Mechanical installation consists of:

■

Installing the Pass-Through mechanism (the two-module version is

factory assembled)

■

Mechanical Installation of the expansion and base module(s).

instructions are provided for all rack types: Compaq Cabinet,

EIA/RETMA Standard 19” cabinet, and StorageWorks SW500, SW600,

or SW800 Metric cabinet

■

Installing the Pass-Through mechanism in the rack

Cabling consists of:

■

Interconnecting the base modules with the Expansion Unit

■

Connecting the Expansion Unit to the Pass-Through mechanism motor

■

Connecting the base module drive SCSI buses to host SCSI interfaces