User`s guide

Operation 2-9
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: c-ch2 Operation Last Saved On: 3/1/99 2:14 PM
Power-On Self Test Screen
When power is first applied to the module, a series of power-on self test
(POST) diagnostics are performed. During POST execution, the model
number of the module, the firmware revision, the status or result of the test in
progress and the current date and time are displayed on the control panel as
shown in Figure 2-4:
COMPAQ TL89x
Firmware Level 0X.xx
Checking Hardware
26-Feb-19xx 15:35:59
Figure 2-4. POST Screen
Initialization Screens
After the POST is completed, the library robotics system is initialized. A series
of screens similar to similar to Figure 2-5 is displayed during this process:
COMPAQ TL89x
Firmware Level 0X.xx
Initializing Loader
26-Feb-19xx 15:35:59
Figure 2-5. Initialization Screen
Default Screen
After the POST diagnostics have concluded successfully and initialization is
complete, the system Default Screen shown in Figure 2-6 appears:
READY
Modules:0_ _ _ _ _ _
0
_ _ _ _ _ _ _ _
9
10
_ _ _ _ 15
Figure 2-6. Default Screen
The numbers on the second line correspond to the Base Modules that are
connected to the system. Up to five Base Modules may be connected. The
third and fourth lines represent the cartridge magazine in the Expansion Unit.
A rectangle will appear in each position that contains a cartridge. An underline
represents an empty slot.