User`s guide

E-2 TL891 MiniLibrary System User's Guide
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: l-appe Product Notes for IBM RS Last Saved On: 3/1/99 2:19 PM
a. Select the entry that matches the controller and target ID of your
installation.
Example: rmt1 available 00–03–00–50 other SCSI tape drive
Where 3 is the SCSI controller number and 5 is the SCSI target ID.
b. On the menu, change the settings of the "BLOCK size", "DENSITY
setting #1", and "DENSITY setting #2".
Set “BLOCK size” to 0.
Set “DENSITY setting #1” to 133.
Set “DENSITY setting #2” to 132.
Density codes are listed below.
c. Accept the changes.
Installing the TZ89 DLT Cartridge SBB Tape
Drive or Tabletop Tape Drive Using Command-
Line Interface
1. From the command line, type:
# cfgmgr
2. To determine which rmt has been added, type:
# lsdev –Cc tape
Example:
# lsdev –Cc tape
Name Status Location Description
rmt0 Available 00–03–00–50 Other SCSI Tape Drive
3. Next, type:
# chdev –l <rmt*> –a density_set_1=133 –a
density_set_2=132
4. Finally, type the following:
# chdev –l <rmt*> –a block_size=<SIZE>
Example:
# chdev –l rmt0 –a block_size=0
rmt0 changed