User`s guide

Diagnostics and Troubleshooting 6-25
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: g-ch6 Diagnostics and Troubleshooting Last Saved On: 3/3/99 11:54 AM
Using CE Diagnostics
The system diagnostics are intended to be used by a Customer Engineer (CE)
or other technically trained person. To use system diagnostics, proceed as
follows.
1. At the Default Screen, press the Enter button. The screen displayed in
Figure 6-2 will appear:
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
Figure 6-2. Main Menu
2. Press the button twice to move the next to Maintenance, then
press the Enter button to select the Maintenance Menu. A display
similar to Figure 6-3 will appear:
Clean Drive
Diagnostic Menu
Demo Menu
Flash Update
Figure 6-3. Maintenance Submenu
3. Press the Enter button to select the Diagnostic Menu. The screen
displayed in Figure 6-4 will appear:
Cartridge Cycle
Friction Test
Tach Feedback
Scanner Feedback
Figure 6-4. Diagnostic Submenu
This screen is scrollable. The list of Diagnostics available is as follows.
■
Cartridge Cycle
■
Friction Test
■
Tach Feedback
■
Scanner Feedback