User`s guide

Diagnostics and Troubleshooting 6-19
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: g-ch6 Diagnostics and Troubleshooting Last Saved On: 3/3/99 11:54 AM
Table 6-2
Fault Symptom Codes
continued
FSC Message Description
5090 Slave Command Failure
Error occurred sending a menu mode
command to a slave module.
6001 Comm Open Error
An attempt to open the RS-232 serial
communication port used by the inter-
module processes failed.
6002 Comm Port Send Error
An inter-module process (Master or
Slave) was sending a packet to a
remote module, but the UART detected
an error condition during the transfer.
6003 Comm Port Recv Error
An inter-module process (Master or
Slave) was receiving a packet from a
remote module, but the UART detected
an error condition during the transfer.
6004
EnQ Without IDs
6005
DeQ Without Ids
6006
EnQ Null Pointer
6007
No Free Comm Blks
6010 Pkt Send Error
The Master inter-module process has
repeatedly attempted to send a packet
to a Slave inter-module process, but
all retries have been exhausted before
the packet could be successfully sent.
6011 Pkt Receive Error
The Master inter-module process has
repeatedly attempted to receive a
packet from a Slave inter-module
process, but all retries have been
exhausted before the packet could be
successfully received.
continued