User`s guide

Regular Maintenance 5-3
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.AO1 File Name: f-ch5 Regular Maintenance Last Saved On: 3/1/99 2:15 PM
Running the Cleaning Cartridge
This procedure assumes that the cleaning cartridge has been installed into Slot
0 of the magazine.
1. At the Default Screen, press the Enter button. The screen shown in
Figure 5-1 appears:
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
Figure 5-1. Main Menu
2. Press the button twice to move the next to Maintenance, then
press the Enter button to select the Maintenance Menu. A screen similar
to Figure 5-2 appears:
Clean Drive
Diagnostic Menu
Demo Menu
Flash Update
Figure 5-2. Maintenance Submenu
3. Press the Enter button once to select Clean Drive. The screen shown in
Figure 5-3 appears:
Cleaning:
*DLT0
Using
*Slot0
Figure 5-3. Cleaning Submenu
4. Lines 2 and 4 are scrollable. The choices available on Line 2 are DLT0,
DLT1 and Both. Let us assume you want to clean DLT0. Press the
Enter button once to accept DLT0. The
moves to line 4 of the
display. Press the Enter button again to use the cartridge in Slot 0. (If
you cannot to use slot 0 for the cleaning cartridge, scroll to line 4 to
select another slot.)
5. The screen shown in Figure 5-4 appears:
Clean: DLT0
Use: Slot0
ENTER To Execute
ESCAPE To Cancel
Figure 5-4. Cleaning Confirmation Screen