Specifications

Error Messages
6-19
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 16 Installation and Hardware Guide Comments:
Part Number: EK-BCP28-IA / 161356-001 File Name: G-CH6 ERROR MESSAGES.DOC Last Saved On: 9/30/99 11:32 AM
Table 6-3
Diagnostic Error Messages
continued
Message Description Probable Cause Action
FLOOD, INVLSU,
LOG_WARNING
The received LSU was discarded. OS error Contact customer
support
FLOOD, INVLSR,
LOG_WARNING
There is an unknown LSR type. OS error Contact customer
support
FLOOD, LSRLEN,
LOG_ERROR
The LSU has an excessive length. OS error Contact customer
support
HLO, INVHLO,
LOG_ERROR
An invalid Hello was received
from a port.
OS error Contact customer
support
HLO, HLOTIMEOUT,
LOG_ERROR
An incompatible Hello time out
was received from a port.
OS error Contact customer
support
HLO, DEADTIMEOUT,
LOG_ERROR
Incompatible inactivity time out
received from a port.
OS error Contact customer
support
FSPF, SCN,
LOG_WARNING
There is an illegal SCN. OS error Contact customer
support
FSPF, NBRCHANGE,
LOG_WARNING
The wrong neighbor ID is in a
Hello message from a port.
OS error Contact customer
support
FSPF, INPORT,
LOG_ERROR
The input port is out of range. OS error Contact customer
support
FSPF, VERSION,
LOG_ERROR
The FSPF version is not
supported.
OS error Contact customer
support
FSPF, SECTION,
LOG_ERROR
The section ID is wrong. OS error Contact customer
support
FSPF, REMDOMAIN,
LOG_ERROR
The remote Domain ID is out of
range.
OS error Contact customer
support
NBFSM,
NGBRSTATE,
LOG_ERROR
Input to neighbor FSM is wrong. OS error Contact customer
support
MCAST, ADDPORT,
LOG_WARNING
A port failed to add. OS error Contact customer
support
MCAST, REMPORT,
LOG_WARNING
A port failed to remove. OS error Contact customer
support
MCAST,
ADDBRANCH,
LOG_ERROR
A branch failed to add. OS error Contact customer
support
continued