Specifications

6-4
Compaq StorageWorks SAN Switch 16 Installation and Hardware Guide
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 16 Installation and Hardware Guide Comments:
Part Number: EK-BCP28-IA / 161356-001 File Name: G-CH6 ERROR MESSAGES.DOC Last Saved On: 9/30/99 11:32 AM
Error Message Numbers
An error number (ERR#xxxx) displays at the end of diagnostic error messages.
Use the following table to match each error number with the test that caused
the error. Definitions of error names and necessary actions to correct each
error are listed in the “Error Message Table” section of this chapter.
Table 6-2
Error Message Numbers
Error Number Test Name Error Name
0001 n/a DIAG-CLEAR_ERR
0004 n/a DIAG-POST_SKIPPED
0B15
0B16
0B0F
SRAM Data Retention test DIAG-REGERR
DIAG-REGERR_UNRST
DIAG-BUS_TIMEOUT
1F25
1F26
1F27
CMEM Data Retention test DIAG-LCMRS
DIAG-LCMTO
DIAG-LCMEM
0110
0111
0112
Memory test DIAG-MEMORY
DIAG-MEMSZ
DIAG-MEMNULL
0415
0416
040F
Port Register test DIAG-REGERR
DIAG-REGERR_UNRST
DIAG-BUS_TIMEOUT
continued