Specifications

Front Panel Switch Management
4-13
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 16 Installation and Hardware Guide Comments:
Part Number: EK-BCP28-IA / 161356-001 File Name: E-CH4 FRONT PANEL SWITCH MANAGEMENT.DOC Last Saved On: 9/30/99 11:27 AM
QuickLoop Disable
To disable QuickLoop, press <Enter> while QuickLoop Disable displays on the
front panel. Press <Enter> to select Yes.
QuickLoop Enable
To enable QuickLoop, press <Enter> while QuickLoop Enable displays on the
front panel. Press <Enter> to select Yes.
QuickLoop Port Disable
To disable a QuickLoop port, press <Enter> while QuickLoop Port Disable displays
on the front panel. Use <Up> and <Down> to choose the desired port
(0 to 15). Press <Enter> to select Yes and <Tab/Esc> to select No.
QuickLoop Port Enable
To enable a QuickLoop port, press <Enter> while QuickLoop Port Enable displays
on the front panel. Use <Up> and <Down> to choose the desired port
(0 to 15). Press <Enter> to select Yes and <Tab/Esc> to select No.
Close Telnet Session
To close a Telnet session, press <Enter> while Close Telnet Session displays on
the front panel.
Reboot
To reboot the switch, press <Enter> while Reboot displays on the front panel.
From the submenu, select Yes
. To exit this function, select No or press
<Tab/Esc>.
NOTE:
Rebooting the switch causes it to immediately exit all current processes and
states and start the POST process. Exercise caution using the reboot command on a
switch connected to the fabric.