Specifications

4-4
Compaq StorageWorks SAN Switch 16 Installation and Hardware Guide
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 16 Installation and Hardware Guide Comments:
Part Number: EK-BCP28-IA / 161356-001 File Name: E-CH4 FRONT PANEL SWITCH MANAGEMENT.DOC Last Saved On: 9/30/99 11:27 AM
Commands
The following table shows the front panel commands and their equivalent
Telnet commands.
Table 4-3
Front Panel and Telnet Commands
Menu Front Panel Telnet Command Default
Configuration Ethernet IP Address ipAddrSet 10.77.77.77
Ethernet Submask ipAddrSet none
Fibre Channel IP Address ipAddrSet none
Fibre Channel Subnetmask ipAddrSet none
Gateway Address ipAddrSet none
Domain configure 0
BB_credit configure 16 (G_Port) - 0 (FL_Port)
R_A_TOV configure 10000
E_D_TOV configure 2000
Data Field Size configure 2112
Non-SCSI Tachyon Mode configure 0
Disable Device Probing configure 0
VC-Encoded Address Mode configure 0
Per-Frame Route Priority configure 0
VC Priorities configure 0,1,2,2,2,2,3,3
Disable Fan Frames configure 0
Always Send RSCN? configure 0
Set QuickLoop Port qlPortEnable <port #> 0
Unset QuickLoop Port qlPortDisable <port #> 0
QuickLoop Partner WWN qlPartner 00:00:00:00:00:00:00:00
QuickLoop No AL_PA OxOO configure 0
Reset to Default configDefault N/A
continued