Specifications

Setup
3-3
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 16 Installation and Hardware Guide Comments:
Part Number: EK-BCP28-IA / 161356-001 File Name: D-CH3 SETUP.DOC Last Saved On: 9/30/99 11:24 AM
Setting the IP Address
The SAN Switch 16 has a default IP address. This IP address is used to
establish a network connection to the switch through the external Ethernet
connection. To set a compatible network address before connecting the switch
to the network, change the IP address through the front panel controls.
To set the IP address using the front panel controls:
1. Select the Configuration menu using the right front panel button.
2. Scroll down to the Ethernet IP Address option. Select this option using
the right button.
3. Use the Up and Down buttons to change the IP address value. Use the
left front panel button to move to the next set of values.
4. When all values are set, press the right button to finish.
5. Confirm that the IP address is correct (select Yes to store the address in
flash memory).
NOTE:
To be completely accessible on the network, the switch can require netmask and
gateway addresses. See your network administrator to determine if additional addresses
are necessary. These addresses can also be set through options on the Configuration
menu.