Specifications

2-6
Compaq StorageWorks SAN Switch 16 Installation and Hardware Guide
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 16 Installation and Hardware Guide Comments:
Part Number: EK-BCP28-IA / 161356-001 File Name: C-CH2 INSTALLATION.DOC Last Saved On: 9/30/99 11:23 AM
Connecting the Power Cable
Connect the AC power cable to the AC connector on the front, right side of the
switch. If you have dual-redundant power supplies, connect the second power
cable to the AC connectors on the front, left side of the switch.
Figure 2-3. Connecting the power cable
Connecting the Ethernet Cable
Connect the switch to an Ethernet 10/100BaseT network by plugging in the
Ethernet cable at the RJ-45 connector. This connection allows access to the
switch’s internal SNMP agent and remote Telnet and Web access.
Figure 2-4. Connecting the Ethernet cable