Specifications

Removal and Replacement Procedures
Maintenance and Service Guide 5–7
5.4 Hard Drive
1. Prepare the computer for disassembly (refer to Section 5.3).
2. Loosen the two Phillips PM2.0×5.0 screws 1 that secure the
hard drive cover to the computer.
3. Lift the front edge of the hard drive cover 2 and swing it up
and to the back.
4. Remove the hard drive cover.
✎
The hard drive cover is included in the Plastics Kit, spare part
number 412764-001.
Removing the Hard Drive Cover
Hard Drive Spare Part Number Information
Hard drives (all 4200 rpm; include hard drive bracket, rubber hard drive
spacer, and hard drive cable)
80 GB
60 GB
40 GB
30 GB
438385-001
412774-001
412773-001
412772-001