Specifications

2-14 Compaq ProLiant ML350 Generation 2 Tower-to-Rack Conversion Guide

Compaq Confidential – Need to Know Required

Writer: Jennifer Hayward Project: Compaq ProLiant ML350 Generation 2 Tower-to-Rack Conversion Guide Comments:

Part Number: 236991-001 File Name: c-ch2 Installing.doc Last Saved On: 6/19/01 8:36 AM

3. Press the component rail release latch on either side of the server ,and

then slide the server into the rack

Figure 2-7. Loading the server into the rack

WARNING: To reduce the risk of personal injury, be careful when pressing the

component rail release latches and sliding the component into the rack. The

slide rails could pinch your fingertips.

IMPORTANT: The first time you slide the component into the rack, you may have to apply

some pressure. After the first time, the ball bearings in the slide move easily.

4. Slide the server in and out of the rack several times to properly align the

slide mount rails.

5. Tighten the mounting bracket screws.

6. Secure the server by screwing the front panel thumbscrews into the rack.