Specifications

Rack Installation 2-7

Compaq Confidential – Need to Know Required

Writer: Jennifer Hayward Project: Compaq ProLiant ML350 Generation 2 Tower-to-Rack Conversion Guide Comments:

Part Number: 236991-001 File Name: c-ch2 Installing.doc Last Saved On: 6/19/01 8:36 AM

Marking with the Template

A template is provided to mark the rack for cage nut and mounting bracket

positions. Starting at the bottom of the rack or at the top of a previously

mounted component:

1. With the two push tabs, place the template in the desired location. Make

sure that you match the hole pattern printed on the template with the

actual holes on the rack vertical rails.

Template

Figure 2-1. Using the template

2. Use a pencil to mark locations indicated on the template for cage nuts

and mounting brackets.

3. After marking the front of the rack, flip the template over, and then

repeat the procedure on the back rails of the rack. Also mark the top of

the template on the rack to help align the next components.