Specifications

Preparing the Server 1-9
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML350 Generation 2 Tower-to-Rack Conversion Guide Comments:
Part Number: 236991-001 File Name: b-ch1 Preparing the Server.doc Last Saved On: 7/10/01 1:05 PM
Removing the Tower Configuration Panel
The tower configuration panel covers the indentations in the server chassis that
are used to secure the mounting rails. To remove the tower configuration
panel:
1. Lay the server on its side with the tower configuration panel facing up.
2. Using a Torx T-15 screwdriver, remove the two retaining screws
,as
indicated in Figure 1-6.
3. Slide the panel back, and then up
.Youmayneedtoexertasmall
amount of force to release the panel from the chassis.
2
1
Figure 1-6. Removing the tower configuration panel