Specifications

Preparing the Server 1-7
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML350 Generation 2 Tower-to-Rack Conversion Guide Comments:
Part Number: 236991-001 File Name: b-ch1 Preparing the Server.doc Last Saved On: 7/10/01 1:05 PM
Removing the Locking Brackets
To remove the locking brackets:
1. Loosen the two thumbscrews located on the left side of the front
chassis
.
2. Slide the access panel back about 1.5 cm (0.5 inch), and then pull the
access panel away from the chassis to remove it
.
1
2
Figure 1-4. Removing the access panel