Specifications

1-6 Compaq ProLiant ML350 Generation 2 Tower-to-Rack Conversion Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML350 Generation 2 Tower-to-Rack Conversion Guide Comments:
Part Number: 236991-001 File Name: b-ch1 Preparing the Server.doc Last Saved On: 7/10/01 1:05 PM
Removing the Feet
To remove the feet:
1. Turn the server upside down.
2. Remove the screw from the center of one of the feet
.
3. Lift up the outside edge of the foot
, and then remove the foot .
3
2
1
Figure 1-3. Removing the feet
4. Repeat this procedure with the other three feet.