Personal Computer Reference Guide
Table Of Contents
- Notice
- Contents
- About This Guide
- Getting Started
- Taking a Look at the Computer
- Using the Keyboard
- Managing Power
- Upgrading Your Computer
- Mobile Expansion Unit (available on select models)
- Using an Internal Modem (available on select models
- Using PC Cards
- Using Audio Features
- Using the Infrared Port
- Securing the Computer
- Intelligent Manageability
- Maintenance, Shipping, and and Travel
- Configuration and Diagnostic Utilities
- Troubleshooting
- Compaq Customer Support
- Regulatory Notices
- Electrostatic Discharge
- Specifications
- Index
9-4 Using Audio Features
Writer: Carey Gregg Project: Comments: 113733-001
File Name: J-CH09.doc Last Saved On: 4/1/99 10:24 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
■ If you use a dynamic microphone, the recommended sensitivity will not
be achieved.
When an external microphone is connected to the computer, the computer
microphone is disabled.
Connecting a Device to the
Stereo Speaker/Headphone Jack
WARNING: To reduce the risk of personal injury, turn down the
volume control before putting on headphones.
■ Use only a 3.5-mm stereo plug. For best sound quality,
❏ Headphones should be 32 ohms.
❏ External speakers should be at least 8 ohms.
■ Connecting an external audio device to the stereo speaker/ headphone
jack disables the computer speaker.