Technical information
8
SDRAM What to order
(Zero or 64MB DIMM as standard)
64MB SV578093
128MB SV578094
256MB SV659066
Maximum 1GB requires removal of initial 128MB memory
if the model selected has 128MB installed.
DIMMs of different sizes may be mixed.
Mains Lead Sets What to
order
Belgium, Denmark, E.Europe, Finland, France,
Fujitsu Spain, Germany, Austria, Holland, Italy,
Luxembourg, Norway, Portugal, Spain, Sweden,
Switzerland
57495001
Caribean/Asia, India, International,
Malaysia/Africa, Middle East, Portuguese
Americas, Singapore, South Africa, Spanish
Americas, UK
57495002
North America, North East Asia 57495004
Australia/New Zealand, Fiji Order locally
Power Supply Unit
IDE CD-ROM
Floppy Disk Drive
PCI Slot 1
PCI Slot 2
Shared PCI/ISA Slot
ISA Slot 1
Pentium II Processor
USB
RJ45
AGP Slot
3.5” disk bay
3.5” disk bay
5.25” disk/tape bay
5.25” disk/tape bay
Floppy
Memory Sockets
PCI Slot 3
Secondary
IDE
Primary
IDE
Intel
440BX
AGP set
Intel 82558
Ethernet LAN
Controller
COM 1
Parallel
Port
COM 2
PS/2
Note:
There are 2 IDE controllers. Each IDE controller can support a maximum
of 2 IDE devices. There is a limit of 3 IDE disks because the CD-ROM is
an IDE device.
Team
server
A800
i
is designed and fully supports Windows NT.
UnixWare only supports SCSI backup devices. UnixWare will always
install on an IDE disk if there are SCSI and IDE disks. There is no
UnixWare limitation for SCSI configurations.
NetWare only supports SCSI backup devices. Use of the 2
nd
IDE channel is
not supported with NetWare so additional disks must be SCSI disks. There
is no NetWare limitation for SCSI configurations.
Internal Backup Device What to
order
4-8GB Travan 4 tape drive (Windows NT only) SV546042
4-8GB DDS-2 4mm DAT tape drive* SV520009
12-24GB DDS-3 4mm DAT tape drive* SV546012
* If a DAT drive is used, an Adaptec 2940UW SCSI adapter and
cable (SV659013) must be ordered.
Disk Capacity Required What to
order
4.3GB IDE SV659010
6.4GB IDE SV659011
8.4GB IDE SV659074
10.1GB IDE SV659012
13.7GB IDE SV659039
4 GB 1” 7200rpm 68 pin Ultra-SCSI* SV578013
9 GB 1” 7200rpm 68 pin Ultra2/LVD SCSI* SV565066
18 GB 1” 7200rpm 68 pin Ultra2/LVD SCSI* SV565067
A maximum of any 3 IDE or 4*4GB SCSI or 4*9GB SCSI or
3*18GB SCSI disks can be installed assuming a tape
device has not been configured.
Fitting kits for 5.25” bays supplied and fitted as standard.
* If a SCSI disk is used, an Adaptec 2940UW SCSI
adapter and cable (SV659013) must be ordered.
PCI I/O Adapters
(Intel 82558 Ethernet controller
on motherboard)
What to
order
Intel PRO/100+ Server Adapter (Ethernet) SV520056
Adaptec AHA2940UW SE SC SCSI adapter
(includes internal SCSI cable with 4 connectors)
SV659013
teamserver
A800i base configurations
What to
order
teamserver
A820i
, 400MHz/512KB Pentium II
CPU, IDE, no HDD, 0MB RAM
SV659004
(SV659008)
teamserver
A820i
, 400MHz/512KB Pentium II
CPU, IDE, 6.4GB HDD, 64MB RAM
SV659048
(SV659052)
teamserver
A820i
, 400MHz/512KB Pentium II
CPU, IDE, 13.7GB HDD, 64MB RAM
SV659049
(SV659053)
teamserver
A840ie
, 450MHz/512KB Pentium III
CPU, IDE, no HDD, 0MB RAM
SV659027
(SV659029)
teamserver
A840ie
, 450MHz/512KB Pentium III
CPU, IDE, 13.7GB HDD, 128MB RAM
SV659050
(SV659054)
teamserver
A870i
, 500MHz/512KB Pentium III
CPU, IDE, no HDD, 0MB RAM
SV659021
(SV659023)
teamserver
A870i
, 500MHz/512KB Pentium III
CPU, IDE, 13.7GB HDD, 128MB RAM
SV659051
(SV659055)
teamserver
A870ie
, 550MHz/512KB Pentium III
CPU, IDE, no HDD, 0MB RAM
SV659040
teamserver
A870ie
, 550MHz/512KB Pentium III
CPU, IDE, 13.7GB HDD, 128MB RAM
SV659041
(SV659045)
teamserver
A870ix
, 600MHz/512KB Pentium III
CPU, IDE, no HDD, 0MB RAM
SV659068
teamserver
A870ix
, 600MHz/512KB Pentium III
CPU, IDE, 13.7GB HDD, 128MB RAM
SV659069
(SV659070)
UK server which includes UK keyboard, mouse and power cable.
Uninterruptable Power Supply products What to
order
UPS Base Package (220-240V) SV537041
PowerChute software for UnixWare 7 SV537043
team
server A820
i
, A840
ie
, A870
i
, A870
ie
, A870
ix
(IDE)