Technical information

23
Internal Backup Devices
(Maximum of 2 devices)
What to
order
4-8GB SLR5 QIC tape drive (CMT compatible) SV546035
4-8GB DDS-2 4mm DAT tape drive SV520009
12-24GB DDS-3 4mm DAT tape drive SV546012
OR one from
20-40GB DLT4000 tape drive SV546034
External Backup Devices
20-40GB DLT4000 tape drive * SV546006
35-70GB DLT7000 tape drive * SV546037
60-120GB DDS-3 4mm DAT Stacker * SV546038
* Up to 2 backup devices can be mounted on a General
Purpose Shelf within the rack.
ECC SDRAM What to order
(64MB or 128MB DIMM as standard)
64MB SV578093
128MB SV578094
256MB SV578095
* Maximum of 1GB requires removal of initial 64MB or 128MB
ECC Memory. DIMMs of different sizes may be mixed.
Power Supply Unit
IDE CD-ROM
Floppy Disk Drive
PCI Slot 1
PCI Slot 2
PCI Slot 3
ISA Slot 1
ISA Slot 2
Pentium II Processors
USB on
motherboard
Ethernet adapter
on motherboard
AGP Slot
Spare 3.5” disk bay
Spare 5.25” disk bay
System disk bay
Spare 5.25” disk bay
Spare 5.25” tape bay
Spare 5.25” tape bay
Ultra-Wide SCSI
on motherboard
Memory Sockets
Fixed Disk Options
(Maximum of 4 Ultra or 5 Ultra2 3.5” disks)
What to
order
4 GB 1” 7200rpm 68 pin Ultra-SCSI SV578013
9 GB 1” 7200rpm 68 pin Ultra2/LVD SCSI SV565066
18 GB 1” 7200rpm 68 pin Ultra2/LVD SCSI SV565067
Up to two 3.5” disks can be installed in the 5.25” disk bays if
the hot-swap cage is not used. One of the tape bays can
also be used for one Ultra2/LVD 68-pin disk.
PCI I/O Adapters
(Intel 82558 Ethernet controller
on motherboard)
What to
order
Intel EtherExpress PRO/10+ PCI adapter (Ethernet)* SV520048
Intel PRO/100+ Server Adapter (Ethernet)* SV520056
Eicon P92 dual-port WAN Adapter (UnixWare only)
SV630002
FDDI PCI Adapter: Dual-Attach Station (DAS SK5544)
SV631002
Olicom 16/4 Token Ring card (OC3140)
SV520058
Adaptec AHA2940UW SE SC SCSI adapter
External SCSI cable 2m (Adaptec to ext tape dev)
SV521002
SV561009
Adaptec AHA2940U2W Ultra2/LVD SC SCSI adapter
Ext. 3m SCSI cable: Adaptec 2940U2W to Disk Node
SV521029
SV642113
SXPCI 32-port PCI Async Adapter
4-port Terminal Adapter for SXPCI Async Adapter
8-port Terminal Adapter for SXPCI Async Adapter
SV521027
SV520015
SV520016
RIO 128-port PCI Async Adapter
16-port RTA with DB25 connector
16-port RTA with RJ45 connector
SV521028
SV521030
SV521031
Mylex AcceleRAID 250 Ultra2 SCSI RAID adapter (8MB)
(Either card to be used with SCA disks and Hot-swap Cage)
SV521033
Mylex eXtremeRAID 1100 Ultra2 SCSI RAID adapter
(32MB, with battery) (To be used with Fujitsu Disk Node)
Ext. 3m SCSI cable: Mylex RAID to Disk Node
SV521036
SV642114
* Refer to PD for operating system restrictions
Hot-swap Disk Options
(Maximum of 3 SCA & one 3.5” disks)
What to
order
4 GB 1” 7200rpm SCA Ultra2/LVD SCSI SV565054
9 GB 1” 7200rpm SCA Ultra2/LVD SCSI SV565060
18 GB 1” 7200rpm SCA Ultra2/LVD SCSI SV565061
Hot-swap Cage – can accommodate up to
3 hot-swap SCA disks (includes 3 disk
carriers)
SV578097
RAID note: the SCSI cable provided with the server
can be used when configuring the Mylex RAID card
for internal disks.
For RAID 5 configurations it is recommended that
the disks are all of the same capacity. e.g. All 4GB,
9GB or 18GB disks.
teamserver
C800i configurations
What to order
teamserver
C800i rack fitting kit
- Consists of
rack-mounting brackets, a shelf & a front bezel
SV578110
Note that a C8x0i and a C800i rack fitting kit
are both required for a rack-mount C8x0i
teamserver
C820i /Z
, 400MHz/512KB Pentium
II CPU, no HDD, no RAM
SV578156
teamserver
C820i /B
, 400MHz/512KB Pentium
II CPU, no HDD, 64MB RAM
SV578084
(SV578090)
teamserver
C820i /E
, 400MHz/512KB Pentium
II CPU, 4GB HDD, 64MB RAM
SV578085
(SV578091)
teamserver
C820i /P
, 400MHz/512KB Pentium
II CPU, 9GB HDD, 128MB RAM
SV578086
(SV578092)
teamserver
C840ie/Z
, 450MHz/512KB Pentium
III CPU, no HDD, no RAM
SV578176
teamserver
C840ie/E
, 450MHz/512KB Pentium
III CPU, 4GB HDD, 64MB RAM
SV578194
(SV578197)
teamserver
C840ie /P
, 450MHz/512KB Pentium
III CPU, 9GB HDD, 128MB RAM
SV578177
(SV578178)
teamserver
C870i /Z
, 500MHz/512KB Pentium
III CPU, no HDD, no RAM
SV578164
teamserver
C870i /E
, 500MHz/512KB Pentium
III CPU, 4GB HDD, 128MB RAM
SV578196
(SV578199)
teamserver
C870i /P
, 500MHz/512KB Pentium
III CPU, 9GB HDD, 128MB RAM
SV578165
(SV578166)
teamserver
C870ie /Z
, 550MHz/512KB Pentium
III CPU, no HDD, no RAM
SV578186
teamserver
C870ie /B
, 550MHz/512KB Pentium
III CPU, 4GB HDD, 128MB RAM
SV578187
(SV578189)
teamserver
C870ie /E
, 550MHz/512KB Pentium
III CPU, 9GB HDD, 128MB RAM
SV578188
(SV578190)
UK server which includes UK keyboard, mouse and power cable.
There are no UK versions of the C8x0
i
/Z models because these “zero
config” servers are intended to be minimal configurations.
A maximum of 7 C800
i
servers (without a console) or 4 C800
i
servers (with
a console) may be fitted in a rack.
team
server
C8
00
i
Options
What to order
Server Manager Assist for
C800
i
SV000142
.
Dual Processor Upgrades What to
order
team
server
C800
i
400MHz/512KB Pentium II CPU
SV578078
team
server
C800
i
450MHz/512KB Pentium III CPU
SV578179
team
server
C800
i
500MHz/512KB Pentium III CPU
SV578172
team
server
C800
i
550MHz/512KB Pentium III CPU
SV578192
Rack-mount
team
server
C820
i,
C840
ie
, C870
i
and C870
ie