Technical information

12
team
server G800
i
The
team
server G800
i
range are departmental servers utilising Pentium II and Pentium III processor technology from
Intel. They replace the current
team
server G700
i
range, offering even greater performance, flexibility and room for
expansion.
• Pentium II 400MHz processors or Pentium III 450MHz, 500MHz, 550MHz and 600MHz processors, upgradeable
from single to dual processor operation
• 100MHz Front Side System Bus • Hot-swap disk, max of 252GB in system cabinet
• 4 dedicated PCI slots (2 hot-swap) • Intel 440GX chipset, offering up to 2GB ECC memory
• Hot-swap power supply & hot-swap fans • Rack-mount capability
Processor
•
team
server G820
i
:
Pentium II 400 MHz with 512KB integral L2 cache
•
team
server G840
ie
:
Pentium III 450 MHz with 512KB integral L2 cache
•
team
server G870
i
:
Pentium III 500 MHz with 512KB integral L2 cache
•
team
server G870
ie
:
Pentium III 550 MHz with 512KB integral L2 cache
•
team
server G870
ix
:
Pentium III 600 MHz with 512KB integral L2 cache
Intel 440GX Chipset
Memory
2GB ECC SDRAM maximum from 4 DIMM slots (amount accessed depends on OS)
Disks (internal max)
Eight disks maximum:
•
8 x 4GB or 9GB or 18GB 1” SCA Ultra2/LVD SCSI disks or
•
6 x 36GB 1.6” and 2 x 4GB or 9GB or 18GB 1" SCA Ultra2/LVD SCSI disks
•
Maximum storage is 252GB from 6 x 36GB 1.6” disks and 2 x 18GB 1” disks
I/O buses
Dual bus PCI/ISA architecture
•
4 x dedicated PCI slots (2 slots are hot-swap PCI if the operating system and PCI card
driver support this feature)
•
1 x dedicated ISA slot
•
1 x shared PCI/ISA slot
On-board I/O
subsystems
•
Dual PCI Ultra2/LVD Symbios SYM53C895 SCSI controller integrated onto
motherboard. (Symbios SYM53C141 integrated controller enables tape devices to run
single ended without degrading performance of the Ultra2/LVD Symbios SYM53C895).
•
10/100 Mbps UTP PCI wake-on LAN Intel 82558 Ethernet controller
integrated onto motherboard
•
I
2
O-ready architecture
Storage bays
•
4 x 5¼- inch format half-height exchangeable device bays, two bays occupied with a
CD-ROM drive and a horizontally mounted 3½ inch diskette drive fitted as standard
•
8 x 3½-inch format hot-swap capable disk bays (6 bays can take disks which are 1” or
1.6” high; the other 2 bays can only take 1” disks)
Storage in standard
configuration
•
1 x 1.44MB 3.5 inch diskette drive
•
1 x IDE CD-ROM drive
Server Management
Suite of products focused on managing server hardware remotely using the standard SNMP
protocol. Integrates with existing network management systems.
•
Server Manager Assist card for out of band access
Graphics as standard
Integrated SVGA ATi 3D RAGE IIC PCI controller with 2MB video DRAM
Operating system
software
•
Microsoft Windows NT Server 4.0
•
SCO UnixWare 7.1 *, OpenServer 5.0.5
•
Novell IntranetWare 4.11 *, NetWare 5 *
* Additional SMP licences may be needed for multi-processor systems.
Memory Upgrades
•
64, 128 and 256MB SDRAM upgrades
Storage Devices
•
4GB 1”, 9GB 1” and 18GB 1” SCA 7200rpm Ultra2/LVD SCSI hard disk drives
•
9GB 1”, 18GB 1” and 36GB 1.6” SCA 10000rpm Ultra2/LVD SCSI hard disk drives
•
4-8GB DDS-2 and 12-24GB DDS-3 4mm internal DAT drives
•
60-120GB DDS-3 4mm external DAT Stacker
•
20-40GB DLT4000 internal and external tape drives
•
35-70GB DLT7000 external tape drive, 4-8GB SLR5 QIC internal tape drive
Network Controllers
•
On-board 10/100 Mbps UTP PCI wake-on LAN Intel 82558 Ethernet controller
•
Intel EtherExpress PRO/10+ PCI adapter and Intel PRO/100+ Server Adapter
Disk Controllers
•
Adaptec AHA2940UW Single-Channel Single-Ended PCI SCSI Adapter
•
eXtremeRAID 1100 Ultra2 SCSI PCI RAID Adapters
UPS
•
APC (American Power Conversion)
PSU
•
Ability to upgrade configuration with additional PSUs to enable Hot-swap capability.
•
One PSU fitted as standard. For redundancy an additional PSU is required.
Dimensions & Weight
Height, Width (exc. Feet), Depth (474 x 307 x 700mm)
Weight: 50kg (max)
Standard warranty
Contact Fujitsu Sales in your country for further details of the warranty that is offered.