Technical information

10
team
server C800
i
The
team
server C800
i
range are workgroup servers utilising the latest Pentium II and Pentium III processor technology
from Intel. They replace the
team
server C700
i
range for small to medium-sized work-groups and offer even greater
performance, flexibility and room for expansion.
• Pentium II 400MHz processor or Pentium III 450MHz, 500MHz, 550MHz processors,
upgradeable from single to dual processor operation
• 100MHz Front Side System Bus • Hot-swap disk capability
• I
2
O-ready Architecture • Intel 440BX chipset, offering up to 1GB ECC memory
• Dedicated AGP slot and graphics card • Rack-mount capability via fitting kit
Processor
•
team
server C820
i
:
Pentium II 400 MHz with 512KB integral L2 cache
•
team
server C840
ie
:
Pentium III 450 MHz with 512KB integral L2 cache
•
team
server C870
i
:
Pentium III 500 MHz with 512KB integral L2 cache
•
team
server C870
ie
:
Pentium III 550 MHz with 512KB integral L2 cache
Intel 440BX Chipset
Memory
1GB ECC SDRAM maximum from 4 DIMM slots (amount accessed depends on OS)
Disks (internal max)
•
4 x 68-pin Ultra-SCSI disks or 5 x 68-pin Ultra2/LVD SCSI disks or
•
3 x SCA Ultra2/LVD SCSI hot-swap disks and 2 x 68-pin Ultra-SCSI disks
I/O buses
Dual bus PCI/ISA architecture
•
3 x dedicated PCI slots
•2
x dedicated ISA slots
•1
x AGP graphics slot
On-board I/O
subsystems
•
Symbios Single-Ended Ultra SCSI controller for Internal Connection,
integrated onto motherboard. Communicates with system via PCI bus
•
10/100 Mbps UTP PCI wake-on LAN Intel 82558 Ethernet controller
integrated onto motherboard
•
I
2
O-ready architecture
Storage bays
•
3 x 5¼ inch format, half height exchangeable device bays (one occupied by a CD-ROM
drive fitted as standard)
•
1 x 3½ inch format, 1 inch height device bay (occupied by a diskette drive)
•
2 x 5¼ inch and 2 x 3½ inch format, half-height internal device bays
Storage in standard
configuration
•
1 x 1.44MB 3.5 inch diskette drive
•
1 x IDE CD-ROM drive
Server Management
Suite of products focused on managing server hardware remotely using the standard SNMP
protocol. Integrates with existing network management systems.
•
Server Manager Assist card for out of band access
Graphics as standard
SVGA AGP graphics controller (ATi 3D Rage 2C AGP, 4MB DRAM)
plugs into a dedicated AGP slot on the motherboard
Operating system
software
•
Microsoft Windows NT Server 4.0
•
SCO UnixWare 7 *
•
Novell IntranetWare 4.11 *
* Additional SMP licences may be needed for multi-processor systems.
Memory Upgrades
•
64, 128 and 256MB SDRAM upgrades
Storage Devices
•
4GB 1” 68 pin 7200rpm Ultra-SCSI hard disk drive (system)
•
9GB and 18GB 1” 68 pin 7200rpm Ultra2/LVD hard disk drives (system)
•
4GB, 9GB and 18GB 1” SCA 7200rpm Ultra2/LVD hard disk drives (optional hot-swap)
•
4-8GB DDS-2 and 12-24GB DDS-3 4mm internal DAT drives
•
60-120GB DDS-3 4mm external DAT Stacker
•
20-40GB DLT4000 internal and external tape drives
•
35-70GB DLT7000 external tape drive
•
4-8GB SLR5 QIC internal tape drive
Network Controllers
•
On-board 10/100 Mbps UTP PCI wake-on LAN Intel 82558 Ethernet controller
•
Intel EtherExpress PRO/10+ PCI adapter and Intel PRO/100+ Server Adapter
Disk Controllers
•
Adaptec AHA2940UW Single-Channel Single-Ended PCI SCSI Adapter
•
AcceleRAID 250 Ultra2 SCSI PCI RAID Adapter
UPS
•
APC (American Power Conversion)
Dimensions & Weight
Height, Width (exc. Feet), Depth (440 x 218 x 500mm)
Weight: 12kg
Standard warranty
Contact Fujitsu Sales in your country for further details of the warranty that is offered.