Technical data

Table C–135: Printer Data Sheet: Xerox DocuPrint N40 (cont.)
xxx-ready attributes
document-formats-ready = PostScript simple-text
native-document-formats-ready = PostScript
input-trays-ready = main manual side top [ bottom envelope large-capacity
middle 1 2345]
output-bins-ready = face-up side top [ large mailbox-1 mailbox-2 mailbox-3
mailbox-4 mailbox-5 mailbox-6 mailbox-7 mailbox-8 mailbox-9 mailbox-10
stacker-1 stacker-2 stacker-3 12345678910]
media-ready = [ a a3 a4 b ledger letter ]
sides-ready = 1 [ 2 ]
finishings-ready = [ staple staple-dual-left staple-top-left ]
Implementation notes
This printer supports an optional stapler and stacker finishing unit capable
of making multiple original document copies (mopies). To enable the
optional stapler set finishings-supported="staple staple-top-left
staple-dual-left" on the logical and physical printers, and
finishings-ready="staple staple-top-left staple-dual-left" on
the physical printer object.
To single staple a document specify finishing=staple or
finishing-staple-top-left with the print request. For two staples on
the long-edge side of a document specify finishing=staple-dual-left.
Stapling requires output-bin=stacker-1, stacker-2, or stacker-3 be
specified with the print request.
To make multiple stapled copies of a document use the copy-count attribute,
not job-copies, when submitting a print job. To disable multiple copy mode set
printer-multiple-copy-mode=no.
C–150 Printer Data Sheets