Technical data

Table C–98: Printer Data Sheet: Lexmark W820 PS (cont.)
xxx-ready attributes
document-formats-ready = PostScript simple-text
native-document-formats-ready = PostScript
input-trays-ready = main manual side top [ bottom envelope large-capacity
middle 1 2345]
output-bins-ready = top [ mailbox-1 mailbox-2 mailbox-3 mailbox-4 mailbox-5
mailbox-6 mailbox-7 mailbox-8 mailbox-9 mailbox-10 stacker-1 stacker-2 1 2 3
45678910]
media-ready = [ a a3 a4 b ledger letter tabloid ]
sides-ready = 1 [ 2 ]
finishings-ready = [ bind edge-stitch punch staple staple-dual-left
staple-top-left ]
Implementation notes
This printer supports an optional stapler, punch, and stacker finishing
unit. To enable these options set finishings-supported="staple
staple-top-left staple-dual-left punch bind edge-stitch" on
the logical and physical printers, and set finishings-ready="staple
staple-top-left staple-dual-left punch bind edge-stitch" on
the physical printer object.
To print a document with a finishing feature select one of the following options:
finishing=staple, Single staple the corner of each document.
finishing=staple-top-left, Single staple the corner of each document.
finishing=staple-dual-left,Two
staples on the long edge of each document.
finishing=punch, Three hole punch the long edge of each document.
finishing=bind, Punch and single staple each document.
finishing=edge-stitch, Punch and dual staple each document.
Stapling and punching requires output-bin=stacker-1 or stacker-2 be
specified with the print request.
This printer is capable of making multiple original document copies (mopies).
To make multiple stapled copies of a document use the copy-count attribute,
not job-copies, when submitting a print job. To disable multiple copy mode set
printer-multiple-copy-mode=no.
C–110 Printer Data Sheets