Technical data

Table C–59: Printer Data Sheet: HP LaserJet 9000 Series PS (cont.)
xxx-ready attributes
document-formats-ready = PostScript simple-text
native-document-formats-ready = PostScript
input-trays-ready = middle side top [ bottom 1 2 3 4 ]
output-bins-ready = face-up top [ stacker-1 1 2 ]
media-ready = [ a a3 a4 b ledger letter tabloid ]
sides-ready = 1 [ 2 ]
finishings-ready = [ bind edge-stitch staple staple-bottom-left staple-dual-left
staple-top-left ]
Implementation notes
This printer supports an optional stapler and stacker finishing unit. To enable
the stapler set finishings-supported="staple staple-top-left
staple-bottom-left staple-dual-left bind edge-stitch" on
the logical and physical printers, and set finishings-ready="staple
staple-top-left staple-bottom-left staple-dual-left bind
edge-stitch" on the physical printer object.
To print a document with a finishing feature select one of the following options:
finishing=staple, Single staple the top corner of each document.
finishing=staple-top-left, Single staple the top corner of each document.
finishing=staple-bottom-left, Single
staple the bottom corner of each document.
finishing=staple-dual-left, Two staples on the edge of each document.
finishing=bind, Three staples on the edge of each document.
finishing=edge-stitch, Six staples on the edge of each document.
Stapling requires that you specify output-bin=stacker-1 with a print request.
These options are not available in V1.1 or earlier releases.
This printer is capable of making multiple original document copies ("mopy"
mode). To make multiple stapled copies of a document, use the copy-count
attribute (not job-copies) when submitting a print job. To disable "mopy" mode,
set printer-multiple-copy-mode=no.
C–68 Printer Data Sheets