Technical data

printer-multiple-copy-mode
Enables making multiple copies of a document at the printer. This setting
should be used only with printers that have a hard disk that can store the
entire contents of a document. When set false, or not defined (the default),
the supervisor sends document data to the printer for each requested copy.
printer-name
Unique name that identifies the printer. This attribute is set when the
printer is created.
printer-problem-message
For printers capable of creating a text string that describes a problem, the
supervisor places the text string in this attribute.
printer-realization
Identifies whether the printer is a logical printer or a physical printer.
Valid values: logical, physical.
printer-setup-module
Specifies a named module to be sent to the printer prior to printing the
document. The module typically contains printer setup commands.
printer-state
Identifies the current state of the printer.
Valid values: unknown, idle, printing, needs-attention,
paused, shutdown, timed-out, and connecting-to-printer.
printers-ready
Identifies the logical/physical printers ready for use on this physical/logical
printer.
sides-supported
Identifies the value of sides supported on this printer.
Valid values: 1, 2.
thickening-supported
Identifies the darkening specification algorithms supported by the printer.
Valid values: entire-document, bitmap-images.
x-image-shift-range-supported
Identifies the x image shift range supported by the printer.
y-image-shift-range-supported
Identifies the y image shift range supported by the printer.
Attribute Descriptions A–7