Technical data

Valid values: none or 0, simple-1–up or 1, simple-2–up or 2,
simple-4–up or 4.
object-class
Identifies the class of the specific object.
output-bins-supported
Identifies the output bins supported by the printer.
Valid values: top, middle, bottom, side, face-up, left, right, large.
Unlike several other xxx-supported attributes, you cannot add values to the
output-bins-supported attribute using the CLI += operator. Nor can you
remove individual items using the -= operator. If you need to add or remove
individual output bin values from this attribute, you must redefine it with
all values using the = operator.
For example, if the attribute has the value top side, and you want to add
bottom to this list, you must redefine the entire attribute as follows:
# pdset -c p -x output-bins-supported="top side bottom" printer
outputs-supported
Identifies the output methods supported by the printer.
Valid value: no-page-collate.
page-select-supported
Identifies the type of page numbering supported by the printer.
Valid values: numeric, alphabetic.
plexes-supported
Identifies the plexes supported by the printer.
Valid values: simplex, duplex, tumble.
printer-associated-host
Identifies the host name of a direct-connected physical printer.
printer-associated-printers
Identifies the physical and logical printers associated with this logical
or physical printer. The attribute is updated when the associated queue
attribute is modified. It is checked for end-to-end consistency when the
printer is enabled.
printer-creation-time
Stores the date and time when a printer object is created.
A–6 Attribute Descriptions