Specifications

Implementing Path Failover
75Continuous Access Storage Appliance Installation and Maintenance Guide
Using Secure Path Manager
To use Secure Path Manager on a host:
1. Open Internet Explorer.
2. Enter the URL in the Address box using the following format:
http:// xxx.xxx.xxx.xxx:2301
(xxx.xxx.xxx.xxx is the IP address of the host on which Secure Path Manager is
installed.)
3. Log in using the following information:
■ User name—administrator
■ Password—administrator
4. Once Secure Path Manager is running, click File > New Profile.
5. Enter a name for the profile and click OK.
6. When prompted for a new password, enter the password you specified in step 3.
7. When prompted for a host name, enter the name of node 0.
8. Repeat step 7 and enter the name of node 1.
9. Click Done.
Secure Path Manager is connected to the Secure Path Agent running on the appliance
nodes.