Specifications

Completing the Appliance Setup
39Continuous Access Storage Appliance Installation and Maintenance Guide
Manually configuring port access
To manually configure port access:
1. Ensure the hp OV CASA Console window is open in administrative mode.
2. Click switchui to open the Windows NT desktop. See “Using switchui” on page 28 for
instructions.
3. Click Start > Settings > Control Panel.
The Control Panel window opens.
4. Click Network.
The Network dialog box opens (Figure 7).
5. Click the Protocols tab, click TCP/IP Protocol, and then click Properties.
The Microsoft TCP/IP Properties dialog box opens (Figure 8).
6. Select the LAN Interface adapter in the Adapter list and click Advanced.
The Advanced IP Addressing dialog box opens (Figure 9).
7. Click the Enable Security check box, which enables the Configure button.
8. Click Configure.
The TCP/IP Security dialog box opens (Figure 10).
9. Add and set access to the specific ports, using the information in Table 3.
Figure 7: Network dialog box