Specifications

Service Messages
153Continuous Access Storage Appliance Installation and Maintenance Guide
LUN mapping events
This section describes messages generated when the LUN mapping for a host changes:
■ LUN mapping enabled
■ LUN mapping disabled
LUN mapping enabled
When a LUN is mapped to a host, a LUN mapping enabled confirmation message is generated.
This message appears in the following format:
RPIC DPF : LMAP emap : Lun mapping enabled : Lun %d : Host %d :
Visible Lun %d : HBA %d
This message is recorded in the event log. This message is used for information purposes only
and is not indicative of a problem within the storage network.
LUN mapping disabled
When a LUN is removed from a host, a LUN mapping disabled confirmation message is
generated. This message appears in the following format:
RPIC DPF : LMAP dmap : Lun mapping disable : Lun %d : Host %d :
Visible Lun %d : HBA %d
This message is recorded in the event log. This message is used for information purposes only
and is not indicative of a problem within the storage network.