Specifications

Appliance Components
138 Continuous Access Storage Appliance Installation and Maintenance Guide
HP ProLiant ML370G3 server
Each appliance uses two servers, also called nodes. Each node is an HP ProLiant ML370G3
server; the appliance software is installed before it ships.
The nodes are defined as peer nodes in an active-active configuration, which means that both
nodes actively monitor and maintain the storage network.
For more information on this server, refer to the ProLiant ML370 Generation 3 Server Setup
and Installation Guide. This guide is available from the following HP web site:
http://wwss1pro.compaq.com/support/reference_library/viewdocument.asp?countrycode=1000&
prodid=5479&source=281992-001.xml&dt=262&docid=16266
Technical specifications
Type Description
Processor Intel Xeon 2.80 GHz processor
Hard drives Six one-inch hot pluggable hard drive bays
Memory 1 GB Advanced ECC PC2100 DDR SDRAM running at
200 MHz
Cache memory 512 KB second-level ECC cache
Network controller NC7781 PCI-X Gigabit NIC (embedded) 10/100/1000
WOL (Wake on LAN)
Storage controller Integrated dual channel wide Ultra3 SCSI adapter
System dimensions 8.69 x 19.0 x 25.75 inches
22.07 x 48.26 x 65.43 cm
Weight 65 pounds/29.48 kg (without hard drives, no RPS)
Power supply 500 Watt-CE Mark hot plug
Operating temperature +5º C to +35º C (41º F to 95º F)
Storage temperature –40º C to +85º C (–40º F to 185º F)
Relative humidity
(non-condensing)
5% to 95%