Specifications

Reinstalling the Appliance Software
126 Continuous Access Storage Appliance Installation and Maintenance Guide
16. Ensure that the following services are set to Automatic:
■ Identification and Authorization Server
■ RPIC DPF
■ sv3000 Management Server (SMS)
■ Tomcat
■ VA Status Monitor (VSM)
■ WebServer
17. Reboot the appliance node.
18. On the console window, click sanos admin > initialize.
19. When prompted, enter the user name and password for the administrator account. Reenter
the password when prompted.
20. To verify that the appliance nodes can detect each other, enter:
get node
21. Repeat step 20 on the peer node.
Note: Install the appropriate back–end path failover software on the appliance node, if applicable.
What to do next
To complete the reinstallation of the appliance software:
1. Set the date and time. (See “Setting the current date and local time” on page 31.)
2. Connect the cables between the appliance node and the storage arrays.
3. Initialize the user database. (See “Initializing the user database” on page 48.)
4. Perform a restore, if applicable.
(Refer to “Backing Up and Restoring Files” in the HP OpenView Continuous Access
Storage Appliance System Administrator’s Guide for more information.)