Technical data

• Additional options for logging on to ServerNet switches or CLIMs in addition to System List
(see Figure 17 (page 66)). Logging on to a CLIM (available with T0633 ABB and later) allows
you to configure the CLIM and/or update CLIM software.
• Actions unique to the OSM Low-Level Link include a Configure Module action for IOAM, VIO,
and p-switch modules, and a Power On System action.
• A System Load dialog box allows you to load the system from a fibre channel or SCSI disk
and to choose alternate system disk configurations (saved on the console or via the OSM
Service Connection) from the System Load Configuration drop-down menu. With T0633 ABB
and later, there is also an option to load the system from a CLIM-attached disk.
• A new option in the Processor Status dialog box allows you to specify how often the Processor
Status bar is refreshed.
• The SP Tool can now be launched from within the OSM Low-Level Link, by selecting Advanced
Service Processor Tool from the Tools menu.
• The OSM Low-Level Link displays only an Inventory view in the View pane, not a Physical
view.
For more information about configuring or using the OSM Low-Level Link, see the OSM Low-Level
Link online help.
For a complete list of Problems Corrected and Known Problems Remaining, see the T0633 softdoc.
Launching and Logging On
From the Start menu, select All Programs > HP OSM > OSM Low-Level Link.
In the Log On dialog box, you can log on using either a system name (as in the TSM LLL) or by
using a host name or IP address. Enter a valid user name and password, then click Log On or
press Enter.
OSM Low-Level Link 65