Technical data

Table 2 lists and describes the OSM guided procedures and service actions that apply to NonStop
BladeSystems, NonStop NS-series servers, NonStop ServerNet Clusters, and legacy NonStop
S-series components.
Table 2 OSM Guided Procedures and Service Actions
How to AccessFunction
OSM guided procedure launched by an action on the CLIM and
CLIM Hard Disk objects to make the replacement of CLIMs and
CLIM Hard Drives more automated.
Replace CLIMs and CLIM Hard Drives
OSM guided procedure launched by an action on the CLIMs
(container) object. It supports NonStop Volume Level Encryption
Register CLIMs with Key Managers
by providing a simple and secure method for registering CLIMs
with Enterprise Secure Key Managers.
OSM guided procedure launched by an action of the same name
on the System object in the OSM Service Connection. It provides
Perform Data Sanitization
a simple and secure method for erasing all data from disk drives
that are to be retired from service. For more information, see the
online help available from within the guided procedure.
OSM guided procedure that allows you to view and save a
summary of the SMARTSSD wear status for any or all Solid State
Get SMARTSSD Wear Status Summary
SAS disk drives on the system. It displays the same SMARTSSD
Wear Gauge values for each drive as the Show SMARTSSD
Wear Gauge action that is available on individual Solid State
SAS disk drives. This guided procedure allows you to display
the information for multiple (any or all selected) drives in a single
interface and to save the resulting data, if desired, in .csv (or
comma delimited) format for use in Microsoft Excel or Apache
OpenOffice (which is available in OSM Console Tools T0634
ABD and later).
Modular I/O and Integrity NonStop NS-Series
Hardware
OSM guided procedure* launched by Replace IOAM Enclosure
or ServerNet Switch Board action on the IOAM Enclosure or
Replace action on the ServerNet Switch Board.
* On an HP Integrity NonStop NS14000 series or NS1000
system in which there is an IOAM enclosure, these are
documented rather than guided procedures.
Replace IOAM Enclosure or (subcomponent)
ServerNet Switch Board
Interactive Replace action on the FCSA object (along with online
help from Help button).
Replace a Fibre Channel ServerNet adapter (FCSA)
OSM guided procedure launched by the Replace action on the
P-Switch module or Replace action on the ServerNet Switch
Board.
Replace P-Switch module or (subcomponent)
ServerNet Switch Board
Documented procedures launched by Replace action on the Blade
Element object to replace entire Blade Element, front panel
Replace Blade Element component
display, processor board, memory board, reintegration board,
fan, optics adapter, or I/O interface board. A Replace action
on the Blade Element Power Supply object launches a procedure
for replacing that component.
Documented procedures launched by Replace action on the
Processor Components object
Replace LSU component
OSM guided procedure launched by the Firmware Update action
on the Blade Complex object, to update Blade Element firmware
Blade Complex Firmware Update
in the each Blade Complex. For Integrity NonStop NS1000 and
NS5000T systems, a documented firmware update procedure
is launched from the Blade Element object instead.
62 Getting Started With OSM Applications