Technical data

Figure 2 Multi-Resource Actions Dialog Box: SWAN CLIP Object Selected
In Figure 3, a continuation of the SWAN CLIP example, the Stop action has been selected from
the list of available actions for the CLIP object. Using the Add or Add All buttons, select and move
only the CLIPs you want to perform the action on to the blank list that appeared below the Add
and Add All buttons. (The red lines in Figure 3 indicate where you can click and drag to resize
the areas that these lines divide.) Then, click Perform Action to perform the Stop action on all CLIPs
in that lower list. The progress bar below the list of selected CLIPs indicates the status of each
individual Stop action (in this example, three CLIPs were chosen to be stopped. For information
on failed actions, click Action Summary. You can update SWAN CLIP firmware and then restart
the CLIPs using this dialog box in similar fashion.
OSM Service Connection 45