Specifications

3–7
Compaq HSG80 Array Controller ACS Version 8.4 Configuration and CLI Reference Guide
Place one space between the port number, target number, and the two-digit LUN
number when entering the PTL address. An example of a PTL address is shown in
Figure 3–3.
Figure 3–3 PTL Naming Convention
Figure 3–4 shows the addresses for each device in a typical, extended configuration.
Use this figure along with the “Configuration Rules,” page 5–3 to help you work with
the devices in your configuration.
LUN 00 (leading zeros are not required)
Target 02 (leading zeros are not required)
Port 1
02 001