Specifications

I–1
Compaq HSG80 Array Controller ACS Version 8.4 Configuration and CLI Reference Guide
Index
A
AC input module
part number, 1–4
Access paths
general description, 3–14
Active ports
multiple-bus failover, 2–7
transparent failover mode, 2–5
Active vs. standby ports
multiple-bus failover mode, 2–7
transparent failover mode, 2–5
Adapters.See Host ports, 1–5
ADD DISK, 7–10
NOTRANSPORTABLE, 7–11
TRANSFER_RATE_REQUESTED,
7–11
TRANSPORTABLE, 7–11
ADD DISK container-name scsi-port-
target-lun, 7–10
ADD MIRRORSET, 7–13
COPY, 7–13
POLICY, 7–14
READ_SOURCE, 7–14
ADD RAIDSET, 7–17
NOPOLICY, 7–18
NOREDUCED, 7–19
POLICY, 7–18
RECONSTRUCT, 7–18
REDUCED, 7–19
ADD RAIDSET RAIDset-name
container-nameN, 7–17, 7–21, 7–124
ADD SPARESET, 7–23
ADD SPARESET disk-name, 7–23
ADD STRIPESET, 7–24
ADD STRIPESET stripeset-name
container-nameN, 7–24
ADD UNIT, 7–27
DISABLE_ACCESS_PATH, 7–29
ENABLE_ACCESS_PATH, 7–29
MAXIMUM_CACHED_TRANSFER,
7–30
NOPREFERRED_PATH, 7–31
NOREAD_CACHE, 7–32
NOREADAHEAD_CACHE, 7–32
NORUN, 7–32
NOWRITE_PROTECT, 7–33
NOWRITEBACK_CACHE, 7–33
PARTITION, 7–30
PREFERRED_PATH, 7–31
READ_CACHE, 7–32
READAHEAD_CACHE, 7–32
RUN, 7–32
WRITE_PROTECT, 7–33
WRITEBACK_CACHE, 7–33
ADD UNIT unit-number container-
name, 7–27
Adding
disks, 7–10
mirrorsets, 7–13
RAIDsets, 7–17
sparesets, 7–23
stripesets, 7–24
units, 7–27
Adding disk drives
as eligible devices, 6–3