Specifications

1–9
Compaq HSG80 Array Controller ACS Version 8.4 Configuration and CLI Reference Guide
NOTE: To view an optional maintenance port cable and its components for a
terminal connection, see the HSG80 Array Controller ACS Version 8.3 and 8.4
Maintenance and Service Guide.
CAUTION: If the Fibre Channel optical cable is not properly connected to
the controller, controller failure may result. In addition, if the cable is not
regularly maintained, its performance and lifespan will be affected.
Before proceeding, it is important to administer the precautionary
measures detailed below and in the HSG80 Array Controller ACS
Version 8.3 and 8.4 Maintenance and Service Guide.
Fibre Channel Optical Cable Precaution
Prior to connecting the Fibre Channel cable to the controller, look for the white stripe
on each side of the coupling. After the cable is seated into the controller, be sure that
the white stripes are hidden. Also, when connecting the Fibre Channel cable to the
controller, listen for a distinctive “snap” sound. This will indicate that the cable is
properly inserted into the controller.
4Program card slot
5 Program card ejection button
6 PCMCIA Program card
7ESD/PCMCIA program card cover
8 Fibre Channel optical cable
9 Maintenance port cable
10 Maintenance port
11 Operator control panel (OCP)
12 Lever for removing, installing, and retaining controller module (2)
Table 1–3. Key to Figure 1–2 HSG80 Array Controller Fibre Channel Optical
Cabling (Continued)
Item Description