Specifications

7–127
Compaq HSG80 Array Controller ACS Version 8.4 Configuration and CLI Reference Guide
NOTE: Regardless of storageset type, the RUN and NORUN switches cannot be
specified for partitioned units.
ENABLE_ACCESS_PATH=
DISABLE_ACCESS_PATH=
Specifies the access path. It can be a single specific host ID, multiple host IDs, or all
host IDs (ALL). If you have multiple hosts on the same bus, you can use this switch to
restrict hosts from accessing certain units. This switch limits visibility of specific
units from certain hosts. For example, if two hosts are on the same bus, you can
restrict each host to access only specific units.
Table 7–6 SET unit-number Switches for Existing Containers
Container Type
Switch
ENABLE_ACCESS_PATH DISABLE_ACCESS_PATH MAXIMUM_CACHED_ TRANSFER_SIZE IDENTIFIER NOIDENTIFIER PREFERRED_PATH NOPREFERRED_PATH READ_CACHE NOREAD_CACHE READAHEAD_CACHE NOREADAHEAD_CACHE WRITE_PROTECT NOWRITE_PROTECT WRITEBACK_CACHE NOWRITEBACK_CACHE RUN NORUN
RAIDset
✔✔✔✔✔✔✔✔✔
Stripeset
✔✔✔✔✔✔✔✔✔
Mirrorset
✔✔✔✔✔✔✔✔✔
NoTransportable Disk
✔✔✔✔✔✔✔✔✔
Transportable Disk
✔✔✔✔✔✔✔ ✔