Specifications

7–102

CLI Commands

Storagesets cannot be made transportable. Specify NOTRANSPORTABLE for all disks

used in RAIDsets, stripesets, mirrorsets, and sparesets. Transportable disks do not

contain any metadata or restricted areas on the disk. Therefore, transportable disks

forfeit the advantage metadata provides. Transportable disks can be moved to a non-

StorageWorks environment with their data intact.

If you specify the NOTRANSPORTABLE switch and there is no metadata on the

unit, the unit must be initialized. If you specify TRANSPORTABLE for a disk that

was originally initialized as a NOTRANSPORTABLE, you should initialize the disk.

NOTE: Compaq recommends you avoid specifying TRANSPORTABLE unless

transportability of the device or media is imperative and there is no other way to

accomplish moving the data.

Examples

This example shows how to set the data transfer rate of DISK20000 to 5MHz:

SET DISK20000 TRANSFER_RATE_REQUESTED=5MHZ

This example shows how to set DISK10300 to transportable:

SET DISK10300 TRANSPORTABLE