Specifications

7–101
Compaq HSG80 Array Controller ACS Version 8.4 Configuration and CLI Reference Guide
SET device-name
Changes the transportable characteristics and the maximum data transfer rate between
the controller and the specified device.
Syntax
SET device-name
Parameter
device-name
Specifies the name of the device to change. This can be a previously named device,
disk, passthrough device, or container.
Switches
TRANSFER_RATE_REQUESTED=ASYNCHRONOUS
TRANSFER_RATE_REQUESTED=20MHZ (Default)
TRANSFER_RATE_REQUESTED=10MHZ
TRANSFER_RATE_REQUESTED=5MHZ
Specifies the maximum data transfer rate for the controller to use in communicating
with the device. You may need to limit the transfer rate to accommodate long cables
between the controllers and the device.
TRANSPORTABLE
NOTRANSPORTABLE (Default)
Indicates whether a disk can be accessed exclusively by StorageWorks controllers.
Set the TRANSPORTABLE switch for disks only.