Specifications

7–57

Compaq HSG80 Array Controller ACS Version 8.4 Configuration and CLI Reference Guide

DELETE

unit-number

Deletes a logical unit from the controller configuration. The host cannot address

deleted units. If the unit’s write-back caching feature is enabled, the controller flushes

the cached data to the unit’s devices before deleting the unit.

Before using the DELETE unit-number command, clear any errors with the

CLEAR_ERRORS UNWRITEABLE_DATA or CLEAR_ERRORS LOST_DATA

commands.

Syntax

DELETE unit-number

Parameter

unit-number

Identifies the unit number to be deleted. The unit-number is the same name given to

the unit when it was created using the ADD UNIT command.

Example

To delete disk unit number D103, enter:

DELETE D103