Specifications

7–55

Compaq HSG80 Array Controller ACS Version 8.4 Configuration and CLI Reference Guide

DELETE FAILEDSET

Removes a disk drive from the failedset. The failedset contains disk drives removed

by the controller from RAIDsets and mirrorsets because they failed or were manually

removed using the SET command. Enter the DELETE FAILEDSET command before

physically removing failed disks from the storage shelf for testing, repair, or

replacement.

You should consider all disk drives in the failedset defective. Repair or replace disks

found in the failedset.

Syntax

DELETE FAILEDSET disk-name

Parameter

disk-name

Identifies the disk you want to delete from the failedset. Only one disk at a time can

be removed from a failedset.

Example

To delete DISK20200 from the failedset, use the following command:

DELETE FAILEDSET DISK20200