Specifications

7–51
Compaq HSG80 Array Controller ACS Version 8.4 Configuration and CLI Reference Guide
DELETE connections
Deletes a host connection entry from the table of known connections.
This command deletes a specified connection from the table of known connections
maintained by the controller.
The table of known host connections is maintained in the controllers NVRAM. Once
a connection is added to the table, it stays there, even if the physical connection
between host adapter and controller port is severed. The only way to remove a
connection from the table is through the DELETE connections command.
DELETE connections removes the connection from the table whether or not the host
adapter is still physically connected to a controlled port.
NOTE: A connection that has access path explicitly enabled on a unit cannot be
deleted. Access path is enabled through the ADD UNIT or SET UNIT commands. If
access path is generically enabled for all connections (ENABLE_ACCESS_PATH=
ALL), then any or all connections can be deleted.
Syntax
DELETE connection-name
Parameters
connection-name
The name given to the host connection. The connection name is one of the following:
■ The default name assigned to the host connection when it was physically
connected to the controller port. Default names are of the form !NEWCONnn.
■ The name given through the RENAME command.
■ The name given through the ADD CONNECTIONS command.