Specifications

7–22 CLI Commands
The combined initiator unit-name target path-name must be typed as follows:
■ initiator unit name controller pair name\remote unit name
Examples
Create a host-addressable unit D1 on the local controller:
ADD DISK DISK10000 1 0 0
ADD DISK DISK20100 2 1 0
ADD STRIPESET STRIPE1 DISK10000 DISK20100
INITIALIZE STRIPE1
ADD UNIT D1 STRIPE1
Create a host-addressable unit D21 on the remote controller:
ADD DISK DISK30200 3 2 0
ADD DISK DISK40300 4 3 0
ADD STRIPESET STRIPE1 DISK30200 DISK40300
INITIALIZE STRIPE1
ADD UNIT D21 STRIPE1
Name the controller pair LONDON, which consists of the local controller and the
remote controller:
SET THIS_CONTROLLER REMOTE_COPY=LONDON
Add the remote copy set RCS1:
ADD REMOTE_COPY_SET RCS1 D1 LONDON\D21
See also
ADD REMOTE_COPY_SETS
SET controller REMOTE_COPY
SET remote-copy-set-name