Specifications

7–7
Compaq HSG80 Array Controller ACS Version 8.4 Configuration and CLI Reference Guide
NOTE: The default connection name is assigned automatically by the controller
when the connection is physically made between a host adapter and a controller
port. Default connection names are assigned only by the controller.
HOST_ID=nnnn-nnnn-nnnn-nnnn
Host_ID is the worldwide name of the host. It is a 16-character hexadecimal number.
The hyphens aren’t necessary, but are recommended to avoid mistakes in entering the
number.
ADAPTER_ID=nnnn-nnnn-nnnn-nnnn
Adapter_ID is the worldwide name of the adapter. It is a 16-character hexadecimal
number. The hyphens aren’t necessary, but are recommended to avoid mistakes in
entering the number. Adapter_ID maps to the Fibre Channel convention port name.
NOTE: The worldwide name of the host and adapter are sometimes the same. This
is a characteristic of the adapter.
CONTROLLER=THIS_CONTROLLER
CONTROLLER=OTHER_CONTROLLER
The controller parameter specifies whether the connection is to “this controller” or
“other controller.”
PORT=1
PORT=2
The port parameter specifies which port, 1 or 2, the connection is on.
Switches
UNIT_OFFSET=n
Offset is a decimal value that establishes the beginning of the range of units that a host
connection can access. It defines and restricts host connection access to a contiguous
group of unit numbers.